This section concludes our introduction to C++. We introduce ``real'' object-oriented concepts and we answer the question, how a C++ program is actually written.
class Point3D : public Point {
int _z;
public:
Point3D() {
setX(0);
setY(0);
_z = 0;
}
Point3D(const int x, const int y, const int z) {
setX(x);
setY(y);
_z = z;
}
~Point3D() { /* Nothing to do */ }
int getZ() { return _z; }
void setZ(const int val) { _z = val; }
};
The type of inheritance influences the access rights to elements of the various superclasses. Using public inheritance, everything which is declared private in a superclass remains private in the subclass. Similarly, everything which is public remains public. When using private inheritance the things are quite different as is shown in table 9.1.
The leftmost column lists possible access rights for elements of classes. It also includes a third type protected. This type is used for elements which should be directly usable in subclasses but which should not be accessible from the outside. Thus, one could say elements of this type are between private and public elements in that they can be used within the class hierarchy rooted by the corresponding class.
The second and third column show the resulting access right of the elements of a superclass when the subclass is privately and publically derived, respectively.
When we create an object with
Point3D point(1, 2, 3);
the second constructor of Point3D is invoked. Prior to the execution of the constructor body, the constructor Point() is invoked, to initialize the point part of object point. Fortunately, we have defined a constructor which takes no arguments. This constructor initializes the 2D coordinates _x and _y to 0 (zero). As Point3D is only derived from Point there are no other constructor calls and the body of Point3D(const int, const int, const int) is executed. Here we invoke methods setX() and setY() to explicitly override the 2D coordinates. Subsequently, the value of the third coordinate _z is set.
This is very unsatisfactory as we have defined a constructor Point() which takes two arguments to initialize its coordinates to them. Thus we must only be able to tell, that instead of using the default constructor Point() the paramterized Point(const int, const int) should be used. We can do that by specifying the desired constructors after a single colon just before the body of constructor Point3D():
class Point3D : public Point {
...
public:
Point3D() { ... }
Point3D(
const int x,
const int y,
const int z) : Point(x, y) {
_z = z;
}
...
};
If we would have more superclasses we simply provide their constructor calls as a comma separated list. We also use this mechanism to create contained objects. For example, suppose that class Part only defines a constructor with one argument. Then to correctly create an object of class Compound we must invoke Part() with its argument:
class Compound {
Part part;
...
public:
Compound(const int partParameter) : part(partParameter) {
...
}
...
};
This dynamic initialization can also be used with built-in data types. For example, the constructors of class Point could be written as:
Point() : _x(0), _y(0) {}
Point(const int x, const int y) : _x(x), _y(y) {}
You should use this initialization method as often as possible, because it allows the compiler to create variables and objects correctly initialized instead of creating them with a default value and to use an additional assignment (or other mechanism) to set its value.
class DrawableString : public Point, public DrawableObject {
...
public:
DrawableString(...) :
Point(...),
DrawableObject(...) {
...
}
~DrawableString() { ... }
...
};
We will not use this type of inheritance in the remainder of this tutorial. Therefore we will not go into further detail here.
class DrawableObject {
public:
virtual void print();
};
Class DrawableObject defines a method print() which is virtual. We can derive from this class other classes:
class Point : public DrawableObject {
...
public:
...
void print() { ... }
};
Again, print() is a virtual method, because it inherits this property from DrawableObject. The function display() which is able to display any kind of drawable object, can then be defined as:
void display(const DrawableObject &obj) {
// prepare anything necessary
obj.print();
}
When using virtual methods some compilers complain if the corresponding class destructor is not declared virtual as well. This is necessary when using pointers to (virtual) subclasses when it is time to destroy them. As the pointer is declared as superclass normally its destructor would be called. If the destructor is virtual, the destructor of the actual referenced object is called (and then, recursively, all destructors of its superclasses). Here is an example adopted from [1]:
class Colour {
public:
virtual ~Colour();
};
class Red : public Colour {
public:
~Red(); // Virtuality inherited from Colour
};
class LightRed : public Red {
public:
~LightRed();
};
Using these classes, we can define a palette as follows:
Colour *palette[3]; palette[0] = new Red; // Dynamically create a new Red object palette[1] = new LightRed; palette[2] = new Colour;
The newly introduced operator new creates a new object of the specified type in dynamic memory and returns a pointer to it. Thus, the first new returns a pointer to an allocated object of class Red and assigns it to the first element of array palette. The elements of palette are pointers to Colour and, because Red is-a Colour the assignment is valid.
The contrary operator to new is delete which explicitly destroys an object referenced by the provided pointer. If we apply delete to the elements of palette the following destructor calls happen:
delete palette[0]; // Call destructor ~Red() followed by ~Colour() delete palette[1]; // Call ~LightRed(), ~Red() and ~Colour() delete palette[2]; // Call ~Colour()
The various destructor calls only happen, because of the use of virtual destructors. If we would have not declared them virtual, each delete would have only called ~ Colour() (because palette[i] is of type pointer to Colour).
class DrawableObject {
...
public:
...
virtual void print() = 0;
};
This class definition would force every derived class from which objects should be created to define a method print(). These method declarations are also called pure methods.
Pure methods must also be declared virtual, because we only want to use objects from derived classes. Classes which define pure methods are called abstract classes.
class Complex {
double _real,
_imag;
public:
Complex() : _real(0.0), _imag(0.0) {}
Complex(const double real, const double imag) :
_real(real), _imag(imag) {}
Complex add(const Complex op);
Complex mul(const Complex op);
...
};
We would then be able to use complex numbers and to ``calculate'' with them:
Complex a(1.0, 2.0), b(3.5, 1.2), c; c = a.add(b);
Here we assign c the sum of a and b. Although absolutely correct, it does not provide a convenient way of expression. What we would rather like to use is the well-known ``+'' to express addition of two complex numbers. Fortunately, C++ allows us to overload almost all of its operators for newly created types. For example, we could define a ``+'' operator for our class Complex:
class Complex {
...
public:
...
Complex operator +(const Complex &op) {
double real = _real + op._real,
imag = _imag + op._imag;
return(Complex(real, imag));
}
...
};
In this case, we have made operator + a member of class Complex. An expression of the form
c = a + b;
is translated into a method call
c = a.operator +(b);
Thus, the binary operator + only needs one argument. The first argument is implicitly provided by the invoking object (in this case a).
However, an operator call can also be interpreted as a usual function call, as in
c = operator +(a, b);
In this case, the overloaded operator is not a member of a class. It is rather defined outside as a normal overloaded function. For example, we could define operator + in this way:
class Complex {
...
public:
...
double real() { return _real; }
double imag() { return _imag; }
// No need to define operator here!
};
Complex operator +(Complex &op1, Complex &op2) {
double real = op1.real() + op2.real(),
imag = op1.imag() + op2.imag();
return(Complex(real, imag));
}
In this case we must define access methods for the real and imaginary parts because the operator is defined outside of the class's scope. However, the operator is so closely related to the class, that it would make sense to allow the operator to access the private members. This can be done by declaring it to be a friend of class Complex.
We can define functions or classes to be friends of a class to allow them direct access to its private data members. For example, in the previous section we would like to have the function for operator + to have access to the private data members _real and _imag of class Complex. Therefore we declare operator + to be a friend of class Complex:
class Complex {
...
public:
...
friend Complex operator +(
const Complex &,
const Complex &
);
};
Complex operator +(const Complex &op1, const Complex &op2) {
double real = op1._real + op2._real,
imag = op1._imag + op2._imag;
return(Complex(real, imag));
}
You should not use friends very often because they break the data hiding principle in its fundamentals. If you have to use friends very often it is always a sign that it is time to restructure your inheritance graph.
Roughly speaking, modules consist of two file types: interface descriptions and implementation files. To distinguish these types, a set of suffixes are used when compiling C and C++ programs. Table 9.2 shows some of them.
In this tutorial we will use .h for header files, .cc for C++ files
and .tpl for template definition files. Even if we are writing ``only''
C code, it makes sense to use .cc to force the compiler to treat it as
C++. This simplifies combination of both, since the internal mechanism of how
the compiler arrange names in the program differs between both
languages![[*]](foot_motif.gif)
.
and translates
them into
object files. Typical suffixes for that file type are .o or
.obj.
After successful compilation the set of object files is processed by a
linker. This program combine the files, add necessary libraries and
creates an executable. Under UNIX this file is called a.out if not
other specified.
These steps are illustrated in Figure 9.1.
With modern compilers both steps can be combined. For example, our small example programs can be compiled and linked with the GNU C++ compiler as follows (``example.cc'' is just an example name, of course):
gcc example.cc
To avoid the inclusion of multiple copies caused by mutual dependencies we use conditional coding. The preprocessor also defines conditional statements to check for various aspects of its processing. For example, we can check if a macro is already defined:
#ifndef MACRO #define MACRO /* define MACRO */ ... #endif
The lines between #ifndef and #endif are only included, if MACRO is not already defined. We can use this mechanism to prevent multiple copies:
/* ** Example for a header file which `checks' if it is ** already included. Assume, the name of the header file ** is `myheader.h' */ #ifndef __MYHEADER_H #define __MYHEADER_H /* ** Interface declarations go here */ #endif /* __MYHEADER_H */
__MYHEADER_H is a unique name for each header file. You might want to follow the convention of using the name of the file prefixed with two underbars. The first time the file is included, __MYHEADER_H is not defined, thus every line is included and processed. The first line just defines a macro called __MYHEADER_H. If accidentally the file should be included a second time (while processing the same input file), __MYHEADER_H is defined, thus everything leading up to the #endif is skipped.
void display(const DrawableObject obj);does not produce the desired output.
